BuildASoil
WDG3000 Extra Strength BTI 8oz
WDG3000 Extra Strength BTI 8oz
Couldn't load pickup availability
What WDG3000 is
Bti is short for Bacillus thuringiensis subspecies israelensis. It works on larvae in the water when they eat it. It does not affect adult mosquitoes.
WDG stands for water dispersible granule. It is made by Becker Microbial Products, now part of Clarke, and sold commercially as AquaBac WDG 3000. The other 57% is the carrier that keeps the granules dispersing evenly in the tank.
Where to use it
Also labeled for nuisance aquatic midges in shallow ponds, at a higher rate.
Label
Key label directions
The main label directions, with what each one means in practice.
Apply it only to water sites. Never apply it to a drinking water supply.
Always mix it with water before applying. An acre of water surface takes 1.75 to 14 ounces.
Older larvae need the higher rate. When larvae are small, the lower rate is enough.
There is no fixed interval. Reapply when larvae show up again.
Keep the bag sealed, cool and dry.
Rates
How much to mix
Mix the powder into 1 gallon of water, then apply that gallon evenly over 1,000 square feet of water surface. Measure the surface area of the water, not its depth or volume.
| What you are treating | Powder per gallon of water | About |
|---|---|---|
| Mosquito larvae, most standing water | 1.1 to 4.6 grams | 1/2 to 2 1/4 teaspoons |
| Mosquito larvae, polluted water | 4.6 to 9.1 grams | 2 1/4 to 4 1/2 teaspoons |
| Aquatic midges, shallow ponds | 36.4 grams | 6 tablespoons |
- Use the low end when larvae are small. Use the high end when most larvae are large.
- Larger areas: mix 1 gallon for every 1,000 square feet. A 3,000 square foot pond takes 3 gallons.
- Smaller areas: mix a full gallon and apply only the share that matches the area. 100 square feet takes about 13 ounces of the mix.
Teaspoon amounts assume about 2 grams per level teaspoon. Granule density varies, so a gram scale is more accurate. Label rates are 1.75 to 7 oz per acre for most mosquito habitats, 7 to 14 oz per acre for polluted water and 3.5 lb per acre for aquatic midges, mixed in 5 to 100 gallons of water per acre. This mixing guide uses about 44 gallons per acre.
Directions
How to apply
Share



